Fiero V6-173 2.8L (1986)
Shift Cable: Customer Interest
M/T - Poor Shiftability or No Shift Condition
Number
86-7-26
Date
6/86
Subject:
POOR SHIFTABILITY OR NO SHIFT CONDITION WITH MANUAL TRANSMISSION
1986 FIERO WITH 4 SPEED OR 5 SPEED MANUAL TRANSMISSION
SHIFT CABLE ASSEMBLY
Some 1986 Fieros with 4 speed or 5 speed manual transmission may have been built with improperly torqued shift cable or select cable to shift lever
nuts.
This condition may allow the cable adjustment to change due to the loose nut or may cause the cable to separate from the lever if the nut is lost. See
Illustration.
If a shift comment is received, inspect cable nuts, install new nuts and washers if necessary.. Follow the service procedure for adjusting the shift cables,
page 7B-1 in the 1986 Service Manual. Torque the cable nuts to 27 N-m 20 ft.lbs.
