Firebird V6-173 2.8L VIN L 2-bbl HP (1983)
Figure 3
3.
When the transmission is properly assembled, there is normal clearance between the reverse input clutch housing and drum assembly (605), and
the reaction sun shell (670). This normal clearance (1.121 mm to 3.744 mm) will not affect the transmission end play. This clearance can be
observed through the case opening as shown in Figure 3. Do not try to shim this clearance out of the transmission.
4.
End play outside of 0.13 mm to 0.92 mm (.005"-.036") will cause excessive wear to all bearing assemblies, thrust washers, and their mating parts.
