Firebird V6-3.8L VIN K (1995)
Ignition Cable: Service and Repair
Spark Plug Wire Harness Routing
CAUTION: The boots should be twisted one-half turn while removing. DO NOT pull on the wires to remove them from the spark plugs. Pull on the
boots, or use a tool designed for this purpose.
REMOVE OR DISCONNECT
1. Be sure ignition is in "OFF" or "LOCK" position.
2. Spark plug wire harness from wire harness retainers.
3. Spark plug wire harness from ignition control module.
4. Spark plug wire harness from spark plugs.
TIP: Note position of wires before removing them from vehicle.