Firebird V6-3.8L VIN K (1995)
Vehicle Speed Sensor: Initial Inspection and Diagnostic Overview
Perform before beginning System Diagnosis
^
Check for a broken (or partially broken) wire inside of the insulation which could cause system malfunction but prove "GOOD" in a
continuity/voltage check with a system disconnected. These circuits may be intermittent or resistive when loaded, and if possible,
^
should be checked by monitoring for a voltage drop with the system operational (under load).
^
Check for proper installation of aftermarket electronic equipment which may affect the integrity of other systems.
^
Refer to System Diagnosis. See: Component Tests and General Diagnostics/System Diagnosis
