Firebird V8-305 5.0L (1982)
10.
Remove the release paper from the sealing tape, carefully center the part on the panel and press into place over the entire length of the part.
11.
Reinstall the weatherstrip retainer to the panel using the previous screw head marks as locators.
Note:
It may be necessary to drill new holes for the retainer attaching screws if original holes are stripped.
12.
Loosely install the handle to the panel and install the panel on the vehicle.
13.
Apply a bead of 3M # 08011, GM # 12345097 or equivalent to the outboard edge of the retainer, install the weatherstrip to the retainer and
position the butt joints for proper contact.
14.
Remove the handle, install the garnish molding and reinstall the handle.
Parts are expected to be available on May 20, 1991. Until then, normal part orders will not be accepted by GMSPO. Only verifiable emergency VIP
orders will be accepted. SPO will make every effort to obtain parts. All parts will be placed on 400 control to waive VIP surcharges. However, the part
will be shipped premium transportation at dealer's expense. All other order types will be cancelled as incorrectly ordered while the 400 control is in
place.
Labor Operation Number:
B2380 or B2381
Use applicable labor rate.
