pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Customer Interest: > < Wheel Bearing|Adjustments|Page 1098
Page 1
background image

Wheel Cover: All Technical Service Bulletins
Wheels - Wire Wheel Cover Noise

Number

85-3-2

Date

12/84

Subject:

WIRE WHEEL COVER NOISE 1982-85 MODELS

Wire Wheel Cover Assembly

Some wire wheel covers may have a snapping or creaking noise when driving at low speeds.  This noise may be caused by the wheel cover flexing on the
wheel.  This condition can be corrected by removing the wheel covers and placing them upside down on a covered bench.  Then center punch and drill
four (4) 1/4" holes evenly spaced in the wheel cover.  See Illustration.  Holes should be drilled on the second step of the cover from the inboard side. 
Install the four (4) nylon clips, part number 411700 in the drilled holes.
Warranty Information

Labor Operation

T4080

Labor Time:

One - .3 hr.; Four - .5 hr.

Trouble Code:

40

Customer Interest: > < Wheel Bearing|Adjustments|Page 1098