pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Power and Ground Distribution|Locations > < Electrical Systems - Isolation Diode Replacement
Page 2
background image

6.

Tape the diode to the harness or connector using electrical tape. To prevent shorts to ground and water intrusion completely cover all exposed wire
and diode attachment points.

NOTE:
A universal diode with a 3 amp, 400 PIV (Peak Inverse Voltage) rating can be used in all of the previously mentioned applications.

GM parts are currently available from GMSPO.

The following 1993 Service Manuals will need to be updated with the correct part numbers and rating changes.

Models

Page

All Sunbird, Grand Am, 6000,

8A-5-12

Grand Prix And Trans Sport Models

Heat sink, part number 276-1567, can be obtained from Radio Shack.

We believe the diodes and heat sink listed in this article as well as their manufacturer to be reliable. There may be additional manufacturers or equivalent
products. General Motors does not endorse, indicate any preference for or assume any responsibility for the products from these firms or for any such
items which may be available from other sources.

Power and Ground Distribution|Locations > < Electrical Systems - Isolation Diode Replacement