Firebird V8-305 5.0L VIN E (1992)
5. With the compressor mounted to the J 25008-A Holding Fixture, position the Rotor and Bearing Assembly on the front head (Fig. 22). Using
Rotor and Bearing Installer J 9481-A and Universal Handle J 29886 drive the rotor and bearing assembly onto the front head. With the Installer
assembled to the Handle as shown in Figure 22, force will be applied to the inner race of the bearing when installing the assembly onto the front
head of the compressor.
6. Install rotor and bearing assembly retainer ring, using Snap Ring Pliers J 6083 (Fig. 9).
7. Reinstall clutch plate and hub assembly as described previously.
