Firebird V8-305 5.0L VIN E (1992)
Dayton, OH 45417
4.
The following information on the shipping papers (United Parcel Service Hazardous Material Label and Shipper's Certification) must be
completed with the same information as enclosed with the replacement driver's side inflator module when received:
Proper shipping name, hazard, class, "UN" number, DOT exemption number, technical name of material, and emergency response information.
A copy of the emergency response guidelines will be enclosed with the replacement driver's side inflator module and must be attached to the shipping
papers you complete for the inflator module being shipped.
United Parcel Service (UPS) will provide transportation of undeployed driver's side inflator modules. Shipments are to be freight prepaid with the
shipping expenses to be handled in the same manner as any prepaid freight reimbursement.
If a driver's side inflator module is not required to be returned using this return procedure, the inflator module must be deployed prior to disposal.
Always refer to the appropriate Service Manual Section 9J "INFLATOR MODULE HANDLING/SHIPPING/SCRAPPING" when it is necessary to
deploy driver's side inflator modules.
DOT-E 8214 (Thirteenth Revision)
1.
Morton international Inc., Ogden, Utah, is hereby granted an exemption from certain provisions of this Department's Hazardous Materials
Regulations to offer packages prescribed herein of air bag inflators and modules for transportation in commerce subject to the limitations and
special requirements specified herein. This exemption authorizes the transportation of inflators and modules for passive restraint systems as
Flammable solids, n.o.s., and provides no relief from any regulation other than as specifically stated. Each of the following is hereby granted the
status of a party to this exemption:
