pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Air Bag - Module Scrapping Procedure|Page 4831 > < Air Bag - Module Scrapping Procedure|Page 4829
Page 4
background image

2.

BASIS. This exemption is based on Morton International Inc., formerly Morton Thiokol's application dated February 28, 1990, submitted in
accordance with 49 CFR 107.105 and the public proceeding thereon and supplemental letter dated February 22, 1991 and May 9 and 10, 1991 and
December 16, 1991. The granting of party status is based on the following applications submitted in accordance with 107.111 and 107.105 and the
public proceeding thereon:

3.

HAZARDOUS MATERIALS (Descriptor and class). Inflators and modules for passive restraint systems classed as flammable solid containing
one or more of the following:

a.

Not more than 750 grams of a propellant identified as DL-Z113, DL-Z113A, DL-Z126A (wafer) (EX-9103139A) or DLZ126B
(EX-9105249).

b.

Not more than 25 grams of an ignition composition identified as UIX 171, UIX 172, 2A Borony and UIX-8; or not more than 55 grams of
UIX-180.

c.

A length of ignition fuse identified as Hiveliet No. 817892-1.

d.

No more than two electric squibs.

e.

A mechanical sensor approved under EX-8411019.

f.

Not more than one gram of Du Pont IMR 3031 smokeless powder.

Modules may be installed in the steering wheel center piece.

Air Bag - Module Scrapping Procedure|Page 4831 > < Air Bag - Module Scrapping Procedure|Page 4829