Firebird V8-305 5.0L VIN E (1992)
1.
Refer to Figure 4. Remove sunshade screws and sunshade.
2.
Remove header inner trim garnish molding screw.
NOTICE:
Use care to prevent cracking or marring of garnish molding during removal and reinstallation.
3.
Loosen "A" pillar inner garnish molding upper screw (left and right side).
4.
Carefully shift header garnish molding rearward and out of the latch plate. Then slide header garnish molding up and out of the "A" pillar inner
garnish molding.
5.
Note Figure 4, View B. Apply 546 mm (21.5") of 3M # 5430 tape to header garnish molding inner face between the latch plate locations.
