Firebird V8-305 5.0L VIN E (1992)
2.
Refer to Figure 6. Remove attaching screws. Remove old quarter trim caps and shoulder belt bezels.
NOTE:
Some vehicles may already have a new bezel and only need a new cap. If a new bezel is installed, make sure it is installed on the proper side.
3.
Using new bezel as a template, mark locations and drill 3.0 mm (1/8") attaching holes in vehicle and new trim cap.
4.
Install new cap P/N 12517754-5 and new bezel P/N 12508710-11. Match bezel with proper side to avoid improper fit and binding.
5.
Check belts for smooth operation. Raise and latch top.
LABOR OPERATION:
C4018
TIME ALLOWANCE:
1.0 HR. for Both
SEAT BELT QUARTER TRIM CAP ISSUES (II)
Application:
1991
CONDITION:
Convertible topstack folding mechanism rubs against B-pillar trim cap.
CORRECTION:
