pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

TPS - Auto Zeroing Update|Page 2924 > < Shift Light|Testing and Inspection|Page 2919
Page 1
background image

Throttle Position Sensor: Technical Service Bulletins
TPS - Auto Zeroing Update

Number  87-6(Gasoline)-73    

Date  10/87

Subject:

AUTO-ZEROING TPS - SECTION 6E1

1987 GRAND PRIX AND FIREBIRD MODELS EQUIPPED WITH 5.0L ENGINE (VIN CODE H)

The ECM has the ability to auto-zero the TPS voltage if it is below .84 volts. This means that any voltage less than the voltages above will be determined
by the ECM to be 0% (closed) throttle. "Scan" tools that have the ability to read the throttle blade angle should read 0% when the throttle is closed. A
failure in the TPS circuit should set a code 21.

If the voltage is within the specified range of below .84 volts no adjustment is necessary.

If the voltage is greater than the preceding specification or a new TPS is installed, follow the adjustment procedure in the service manual and adjust to
.5V +/- .05.

This information supersedes the information printed in the 1987 Service Manuals.

TPS - Auto Zeroing Update|Page 2924 > < Shift Light|Testing and Inspection|Page 2919