pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Brake Caliper|Specifications > < Rear Brake Pads - Uneven or Tapered Wear
Page 1
background image

Brake Caliper: All Technical Service Bulletins
Rear Brake Pads - Uneven or Tapered Wear

File In Section: 5 - Brakes

Bulletin No: 53-50-20

Date: November, 1995

Subject:
Taper Wear and/or Uneven Wear on Rear Disc Brake Pads (Replace Caliper Mounting Brackets)

Models:
1993-96 Chevrolet Camaro
1993-96 Pontiac Firebird

Condition

Some of the above vehicles may exhibit taper wear and/or uneven wear on the rear disc brake pads. (Taper wear is defined as uneven wear of the pad
from end to end or inboard versus outboard uneven wear.) Maximum taper allowed is 0.15 mm (0.006 inch).

Cause

Wear of the caliper guide pins and the bores on the caliper anchor brackets may result in the caliper not sliding freely.

Correction

Replace the caliper anchor bracket, the guide pins and the brake pads. Refer to Section 5B2 of the Service Manual.

Parts Information

Parts are currently available from GMSPO.

Warranty Information

For vehicles repaired under warranty, use:

Labor Operation

Labor Time

H0077 (Bracket, Caliper Mounting

Use published labor

- Replace Both)

operation time.

Brake Caliper|Specifications > < Rear Brake Pads - Uneven or Tapered Wear