Firebird V8-350 5.7L VIN P SFI (1996)
Electronic Brake Control Module: Service and Repair
Electronic Brake Control Module (EBCM)
REMOVE OR DISCONNECT
1. Fasteners on lower sound insulator panel under steering column.
2. Lower sound insulator panel from vehicle.
3. Manual transmission only: left side kick panel.
4. Nut attaching EBCM bracket to upper I/P.
5. Push in retainer (Christmas Tree) attaching EBCM bracket to side wall. It will be necessary to cut the push in retainer head off to remove EBCM
bracket. Do not attempt to pry fastener out as damage to the EBCM bracket may result.
6. EBCM and EBCM bracket from mounting place.
7. EBCM electrical connectors.
8. EBCM from vehicle.
9. Remaining portion of push in retainer. It is necessary to remove the destroyed retainer to insure proper retaining force when installing the new
push in retainer.
INSTALL OR CONNECT
1. EBCM electrical connectors.
2. EBCM and EBCM bracket into mounting location.
3. New push in retainer (Christmas Tree) attaching EBCM bracket to side wall.
4. Nut attaching EBCM bracket to upper I/P. Tighten Nut to 25.0 Nm (18.5 ft. lbs.).
5. Manual transmission only: left side kick panel.
6. Lower sound insulator panel and fasteners.
