pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

With WS6-Ram Air Injection|Page 1456 > < Engine, A/T - Shift/Driveability Concerns/MIL ON|Page 1453
Page 1
background image

Air Filter Element: Service and Repair
With WS6-Ram Air Injection

REMOVE OR DISCONNECT

1. Release the latches from the air cleaner assembly.
2. Remove the air filter housing cover assembly (8).
3. Remove the air filter element (7).
4. Inspect the air filter element (7) for dust, dirt, water and clean or replace if required. 

INSTALL OR CONNECT

1. Install the air filter element (7) into the air filter housing (5).
2. Install the air cleaner cover assembly (8) on the lower air cleaner housing (5).
3. Install the fasteners on the air cleaner assembly (8).

Important: If the Mass Air Flow sensor is installed backwards, the system will go rich. An arrow cast into the plastic portion of the sensor
indicates proper air flow direction. The arrow must point toward the engine.

With WS6-Ram Air Injection|Page 1456 > < Engine, A/T - Shift/Driveability Concerns/MIL ON|Page 1453