Firebird V8-350 5.7L VIN P SFI (1996)
Manifold Pressure/Vacuum Sensor: Service and Repair
MAP Sensor Location
REMOVE OR DISCONNECT
1. Negative battery cable.
2. Electrical connector.
3. Hold down bolts (2).
4. Sensor from intake manifold.
INSTALL OR CONNECT
1. New sensor seal (lightly coated with clean engine oil).
2. Sensor into intake manifold.
3. Hold down bolts.
4. Torque to 6 Nm (50 lb in).
5. Connect electrical connector.
6. Connect negative battery cable.
