Firebird V8-350 5.7L VIN P SFI (1996)
Applying The Solder
Step 5: Solder
Apply 60/40 rosin core solder to the opening in the back of the clip. Follow the manufacturer's instruction for the solder equipment you are using.
Proper First Taping
Step 6: Tape the Splice
Center and roll the splicing tape. The tape should cover the entire splice. Roll on enough tape to duplicate the thickness of the insulation on the
existing wires. Do not flag the tape. Flagged tape may not provide enough insulation, and the flagged ends will tangle with the other wires in the
harness.
Proper Second Taping
