Firebird V8-350 5.7L VIN P SFI (1996)
Throttle Position Sensor: Service and Repair
REMOVE OR DISCONNECT
1.
Throttle Position (TP) sensor electrical connector
2.
Remove two TP sensor attaching screws and retainers
3.
TP sensor
INSTALL OR CONNECT
1.
With the throttle valve in the normally closed idle position, install throttle position sensor on throttle body assembly, making sure TP sensor
pickup lever is located above tang on throttle actuator lever.
2.
Install two TP sensor screws and tighten to 2.0 Nm (18.0 lb in).
