Firebird V8-5.7L VIN G (2001)
4. Remove the push-in retainers from the top of the fascia.
5. Install the spare tire and jack.
6. Install the rear end finish panel.
7. Raise and support the vehicle. Refer to Vehicle Lifting.
Notice: Refer to Fastener Notice in Service Precautions.
8. Install the bumper fascia bolts.
Tighten the bumper fascia bolts to 2 N.m (18 lb in).
9. Install the bumper fascia nuts.
Tighten the bumper fascia nuts to 6 N.m (53 lb in).
10. Remove the push-in retainers located under the fascia.
11. Lower the vehicle.
