Firebird V8-5.7L VIN G (2001)
Cowl Moulding / Trim: Service and Repair
Air Inlet Grille Panel Replacement
Removal Procedure
1. Remove the hood rear seal.
2. Remove the air inlet screen retainers (1) from the driver side screen (2).
3. Remove the windshield wiper arms.
4. Remove the driver side screen (2).
5. Remove the windshield washer nozzle hose clips from the driver side screen (2).
6. Remove the air inlet screen retainers (1) from the passenger side screen (3).
7. Remove the passenger side screen (3).
8. Remove the windshield washer nozzle hose clips from the passenger side screen (3).
Installation Procedure
Important: Install the air inlet screens prior to water testing in order to prevent damage to the windshield washer motor.
1. Route the windshield washer nozzle hose clips to the passenger side screen (3).
2. Install the passenger side screen (3).
3. Install the air inlet screen retainers (1) to the passenger side screen (3).
4. Install the windshield washer nozzle hose clips to the driver side screen (2).
5. Install the driver side screen (2).
6. Install the air inlet screen retainers (1) to the driver side screen (2).
7. Install the windshield wiper arms.
8. Inspect for the proper operation of the Wipers/Washer System.
9. Install the rear hood seal.
