Firebird V8-5.7L VIN G (2001)
1. Install the inside door handle bezel to the vehicle.
2. Connect the light bulb to the rear of the bezel.
3. Snap the bezel to the door trim panel.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the inside handle bezel screws Chevrolet only.
Tighten the screws to 2 N.m (18 lb in).
5. Install the switch plate panel Chevrolet only.
6. Install the inside door handle bezel screw Pontiac only.
Tighten the screws to 2 N.m (18 lb in).
7. Install the lock rod knob (3), perform the following:
1. Pull the lock rod (2) forward in pocket or inside the bezel.
2. Align the lock rod knob (3) over the lock rod (2).
3. Insert rearward end of lock rod knob (3) through the hole inside the bezel.
4. Pull the knob (3) rearward until the end of the rod (2) slides into the depression end of the knob (3).
5. Apply pressure to snap knob (3) over lock rod (2).
Handle Bezel Replacement - Inside
HANDLE BEZEL REPLACEMENT - INSIDE