Firebird V8-5.7L VIN G (2001)
2. Install the hood latch release cable (1) to the hood primary latch with the following procedure:
1. Insert the end of the hood latch release cable (1) to the hood primary latch in order to connect the hood latch release cable (1).
2. Connect the latch clip (2) to the hood primary latch.
3. Install the hood primary latch (1) to the primary latch support (2).
4. Position the hood primary latch (1) in order to line up the bolts/screws with the marks on the primary match support (2).
5. Install the hood primary latch bolts/screws (4).
Tighten the bolts/screws (4) to 18 N.m (13 lb ft).
6. Inspect the hood alignment.
7. Adjust the hood as needed. Refer to Hood Adjustment.
8. Complete the following steps in order to adjust the hood primary latch (1), as needed:
1. Loosen the hood primary latch bolts/screws (4).
2. Adjust the hood primary latch (1) up or down to the specifications noted during inspection.
