pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Drink Holders > < Disabling|Page 9298
Page 2
background image

6. Install the Connector Position Assurance (CPA) to the steering wheel module coil connector located at the base of the steering column.
7. Install the left instrument panel insulator.

8. Install the AIR BAG fuse in the IP fuse block.
9. Install the IP fuse block access door.

10. Staying well away from both air bags, turn the ignition switch to the RUN position.

10.1. The AIR BAG indicator will flash seven times.
10.2. The AIR BAG indicator will then turn OFF.

11. Perform Diagnostic System Check - SIR if the AIR BAG indicator does not operate as described. See: Restraint Systems/Air Bag Systems/Testing

and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System Check

Drink Holders > < Disabling|Page 9298