Firebird V8-5.7L VIN G (2001)
1. Install speaker grille, if removed.
Important: Thread lap belt through slot in quarter inner trim finishing panel.
2. Install quarter inner trim finishing panel (1) to vehicle body (2).
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the rear seat striker bolt/screw and washer.
Tighten the bolt to 35 N.m (26 lb ft).
4. Install the coat hook.
Important: Slide into position and press retainer to lock.
5. Install the left or right shroud side trim finishing panel.
6. Raise the seatback.
Cargo Area Side Trim Panel Replacement
Cargo Area Side Trim Panel Replacement
Removal Procedure
1. Raise the rear compartment lift window.
2. Unsnap and remove the sunshade.
3. With a small flat-bladed tool unlock the right side retainers by rotating a quarter turn.
4. Begin removing the inner trim finishing panels (1) by first lifting the panels from the front corner.
