Firebird V8-5.7L VIN G (2001)
Power Door Lock Switch: Procedures
POWER DOOR LOCK SWITCH REPLACEMENT
REMOVAL PROCEDURE
IMPORTANT: Protect the trim panel with a rag when prying up the switch to prevent marring the trim panel.
1. Pry up the rear edge of the driver side switch, or the front edge of the passenger side switch.
2. Slide the driver side switch rearward, or the passenger side switch forward out of the door trim panel.
3. Disconnect the power door lock electrical connector (7).
4. Remove the power door lock switch (8) from the panel.
INSTALLATION PROCEDURE
1. Install the power door lock switch (8) to the panel.
2. Connect the power door lock switch electrical connector (7).
3. Insert the front edge of the driver side switch, the rear edge of the passenger side switch into the door trim panel.
4. Press the rear edge of the driver side switch, the front edge of the passenger side switch, into the trim panel to secure.
