Firebird V8-5.7L VIN G (2001)
1. Install new door sealing strip (2) to door (1).
IMPORTANT: Temperature must be 95 degrees ± 5 degrees for proper adhesion of strip to door. If necessary, use heat gun to lightly warm strip
prior to installation.
2. Remove protective liner from sealing strip.
IMPORTANT: Position bottom sealing strip carefully. Sealing strip cannot be removed without reapplying adhesive after contact with vehicle.
3. Align bottom sealing strip to locating feature starting at rear edge of door inner panel.
4. Press bottom sealing strip into place and apply pressure along entire surface.