Firebird V8-5.7L VIN G (2001)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Brake Pressure Modulator Valve (BPMV) Bracket Replacement
Brake Pressure Modulator Valve (BPMV) Bracket Replacement
Removal Procedure
Caution: For safety reasons, the Brake Pressure Modulator Valve (BPMV) must not be repaired, the complete unit must be replaced. With
the exception of the EBCM/EBTCM, no screws may be loosened. If screws are loosened, it will not be possible to get the brake circuits
leak-tight and personal injury may result.
1. Turn the ignition switch to the OFF position.
2. Disconnect the EBCM harness connector (6).
Important: Note the locations of the brake pipes in order to aid in installation.
3. Disconnect the brake pipes from the BPMV.
4. Remove 2 nuts (3) that connect the BPMV (1) to the BPMV bracket (2).
Notice: When removing the brake pressure modulator valve, protect the vehicle exterior from possible brake fluid spillage. Brake fluid can cause
damage to painted surfaces.
