Firebird V8-5.7L VIN G (2001)
4. Connect the EBCM harness connector (6).
5. Turn the ignition switch to the RUN position, with the engine off.
6. Perform Diagnostic System Check - ABS.
7. Check brake fluid. Refer to Master Cylinder Reservoir Filling.
Notice: If any brake component is repaired or replaced such that air is allowed to enter the brake system, the entire bleeding procedure must be
followed.
8. Bleed the entire brake system. Refer to Hydraulic Brake System Bleeding (Manual) or Hydraulic Brake System Bleeding (Pressure).
