Firebird V8-5.7L VIN G (2001)
6. Lubricate the brake pedal pin (10) with chassis lubricant.
7. Install the following components to the brake pedal pin (10):
-
The brake pedal pushrod pin retainer (7)
-
The brake pedal pushrod (8)
-
The brake pedal pushrod washer (11)
8. Install the left side instrument panel insulator.
9. Connect the negative battery cable.
-
Tighten the negative battery cable to 15 Nm (11 ft. lbs.).
10. Adjust the following components. Refer to Stoplamp Switch Adjustment.
-
Cruise control release switch
-
Stoplamp and TCC switch
-
Cruise control clutch switch or cruise control clutch anticipate switch
