Firebird V8-5.7L VIN G (2001)
3. Seat the retainer fingers into the park brake cable bracket (2).
4. Pull the rear cable (3) through the park brake cable guides (2) on the rear axle housing. Ensure that the LH cable is routed over the tie rod bracket.
5. Connect the rear park brake cable to the park brake cable equalizer (3).
6. Install the rear cable (2) into the underbody bracket (1). If the tie strap was removed, install a new tie strap.
7. Lower the vehicle.
8. Cycle the park brake lever 3 times.