Firebird V8-5.7L VIN G (2001)
3. Install the wiring harness rosebud clip at the reservoir neck.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the reservoir bolt.
Tighten the coolant recovery reservoir bolt to 12 Nm (106 inch lbs.).
5. Position the servo cable adjuster, if equipped with the 5.7 L engine.
6. Install the servo cable bolts, if equipped with the 5.7 L engine.
Tighten the accelerator and cruise control servo cable adjuster bolts to 8 Nm (71 inch lbs.).
