Firebird V8-5.7L VIN G (2001)
2. Tap the key (1) into the keyway until both ends of the key bottom onto the crankshaft.
3. Install the crankshaft sprocket onto the front of the crankshaft. Align the crankshaft key with the crankshaft sprocket keyway.
4. Use the J 41665 in order to install the crankshaft sprocket.
Install the sprocket onto the crankshaft until fully seated against the crankshaft flange.
5. Rotate the crankshaft sprocket until the alignment mark is in the 12 o'clock position.
Important:
-
Properly locate the camshaft sprocket locating pin with the camshaft sprocket alignment hole.
-
The sprocket teeth and timing chain must mesh.
-
The camshaft and the crankshaft sprocket alignment marks MUST be aligned correctly. Locate the camshaft sprocket alignment mark in the 6
o'clock position.
