Firebird V8-5.7L VIN G (2001)
5. Install the J 41476 and crankshaft balancer bolt to the front cover.
6. Align the tapered legs of the J 41476 with the machined alignment surfaces on the front cover.
Notice: Refer to Fastener Notice in Service Precautions.
7. Install the crankshaft balancer bolt until snug. Do not overtighten.
7.1. Tighten the oil pan-to-front cover bolts to 25 Nm (18 ft. lbs.).
7.2. Tighten the engine front cover bolts to 25 Nm (18 ft. lbs.).
8. Remove the J 41476.
Important:
-
Do not lubricate the oil seal sealing surface.
-
Do not reuse the crankshaft oil seal.
9. Lubricate the outer edge of the oil seal (1) with clean engine oil.
10. Lubricate the front cover oil seal bore with clean engine oil.
