Firebird V8-5.7L VIN G (2001)
10. Remove the J 33013-B.
11. Hold the clutch plate and hub assembly (2) with the J 33027-A.
NOTE: Refer to Fastener Notice in Service Precautions.
12. Install the A/C compressor shaft nut.
Tighten
Tighten the A/C compressor shaft nut to 17.5 N.m (13 lb ft).
13. Spin the pulley rotor by hand to make sure the rotor is not rubbing against the clutch drive plate.
14. Remove the A/C compressor from the J 41790.
15. Install the A/C compressor into the vehicle.
