Firebird V8-5.7L VIN G (2001)
5. Disconnect the following electrical connectors from the HVAC control assembly:
^
HVAC mode switch (1)
^
HVAC control illumination (2)
^
HVAC blower switch (3)
^
Rear defogger (4)
6. Remove the temperature control cable (5) from the HVAC control assembly.
When releasing the control cable clips, use a small screwdriver to remove the cable from the control.
INSTALLATION PROCEDURE
1. Install the temperature control cable connector (5) to the HVAC control assembly.
2. Connect the following electrical connectors to the HVAC control assembly:
^
Rear defogger (4)
^
HVAC blower switch (3)
^
HVAC control illumination (2)
^
HVAC mode switch (1)
