pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Compressor Hose Assembly Replacement|Page 7845 > < Compressor Pressure Relief Valve Removal|Page 7840
Page 1
background image

Hose/Line HVAC: Service and Repair
Compressor Hose Assembly Replacement

TOOLS REQUIRED

J 39400-A Halogen Leak Detector

REMOVAL PROCEDURE

1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
2. Remove the A/C compressor hose assembly from the fan shroud clip(s).
3. Remove the A/C compressor hose assembly from the accumulator.
4. Discard the O-ring.
5. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.

6. Remove the A/C compressor hose assembly nut from the condenser.
7. Discard the O-ring.
8. Remove the A/C compressor.
9. Remove the A/C compressor hose assembly from the vehicle.

10. Discard the sealing washers.

INSTALLATION PROCEDURE

Lightly coat the O-rings with the mineral base 525 viscosity refrigerant oil.

Compressor Hose Assembly Replacement|Page 7845 > < Compressor Pressure Relief Valve Removal|Page 7840