Firebird V8-5.7L VIN G (2001)
4. Remove the PCM and mounting bracket assembly from the engine compartment.
5. Remove the PCM (1) from the mounting bracket (2).
INSTALLATION PROCEDURE
NOTE:
^
Do not touch the connector pins or soldered components on the circuit board in order to prevent possible electrostatic discharge (ESD) damage to
the PCM.
^
In order to prevent internal damage to the PCM, the ignition must be OFF when disconnecting or reconnecting the PCM connector.
1. Install the PCM (1) to the mounting bracket (2).
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the PCM and install the mounting bracket assembly into the vehicle.
Tighten
Tighten the mounting bracket fasteners to 7 N.m (62 lb in).
