Firebird V8-5.7L VIN G (2001)
Cruise Control Module: Service and Repair
CRUISE CONTROL MODULE REPLACEMENT
REMOVAL PROCEDURE
1. If equipped without traction control, perform the following:
1.1. Rotate the throttle lever rearward.
1.2. Push down the cable end to remove it from the throttle lever pin.
1.3. Using a flat bladed tool, push in the cable retainer at the throttle body bracket.
1.4. Slide the cruise control cable up from the throttle body bracket.
1.5. Remove the cruise control cable from under the accelerator/cruise control cable servo bracket.
2. If equipped with traction control, unsnap and remove the cruise control servo cable adjuster cover.
