Firebird V8-5.7L VIN G (2001)
Blower Motor Relay: Service and Repair
BLOWER MOTOR RELAY REPLACEMENT
REMOVAL PROCEDURE
1. Remove the left IP insulator.
2. Remove the left knee bolster.
3. Remove the blower motor relay from the IP tie bar.
4. Disconnect the electrical connector from the blower motor relay.
INSTALLATION PROCEDURE
1. Connect the electrical connector to the blower motor relay.
2. Install the blower motor relay to the IP tie bar.
3. Install the left knee bolster.
4. Install the left side IP insulator.