pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 8039 > < Diagram Information and Instructions|Page 8037
Page 1
background image

Clockspring Assembly / Spiral Cable: Service and Repair

INFLATABLE RESTRAINT STEERING WHEEL MODULE COIL REPLACEMENT

REMOVAL PROCEDURE

1. Disable the SIR system.
2. Remove the inflatable restraint steering wheel module.
3. Remove the steering wheel. 
4. Remove the wire harness straps from the steering wheel column wire harness.
5. Remove the retaining ring.
6. Remove the inflatable restraint steering wheel module coil from the steering shaft.

INSTALLATION PROCEDURE

IMPORTANT:  SIR coil assembly must be centered before it is installed.

1. Center the SIR coil assembly (1), if needed. Refer to Inflatable Restraint Coil Centering - Off Vehicle (Column Shift And Floor Shift) for Steering

Wheel and Column - Tilt in Steering and Suspension..

2. Feed the SIR coil assembly connectors through the steering column.

Diagram Information and Instructions|Page 8039 > < Diagram Information and Instructions|Page 8037