pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Malfunction Lamp / Indicator, Air Bag|Description and Operation|Page 8048 > < Malfunction Lamp / Indicator, Air Bag|Description and Operation
Page 1
background image

Malfunction Lamp / Indicator: Testing and Inspection

AIR BAG INDICATOR CIRCUIT MALFUNTION

CIRCUIT DESCRIPTION

When the ignition is turned ON, the Instrument Panel Cluster (IPC) flashes the AIR BAG indicator seven times. The inflatable restraint Sensing And
Diagnostic Module (SDM) performs diagnostic tests on the SIR system and then commands the IPC to turn the AIR BAG indicator OFF if no SIR
malfunctions exist. The AIR BAG indicator is controlled by the SDM via Class 2 serial data. If the ignition 1 voltage is outside of the normal
operating voltage range (9-16 volts), the SDM will command the IPC to turn the AIR BAG indicator ON with no Diagnostic Trouble Codes (DTCs)
present.

DIAGNOSTIC AIDS

The IPC will turn the AIR BAG indicator ON if there is a loss of serial data communication between the IPC and the SDM. For more detailed
information concerning the Class 2 data lines, refer to Data Link Communications Description and Operation in Data Link Connector.

The following are possible causes of the malfunction:

^

Ignition 1 voltage out of range.

^

An internal IPC malfunction.

^

An internal SDM malfunction.

TEST DESCRIPTION

Steps 1-7

Malfunction Lamp / Indicator, Air Bag|Description and Operation|Page 8048 > < Malfunction Lamp / Indicator, Air Bag|Description and Operation