Firebird V8-5.7L VIN G (2001)
Steps 8-13
The number(s) below refer to the step number(s) on the diagnostic table.
5. Tests to see if the scan tool can communicate with the IPC
6. Tests to see if the ignition 1 voltage is more than 9 V
7. Tests to see if the ignition 1 voltage is more than 16V
8. Tests to see if the SDM connector is damaged or corroded
9. Tests for an open or high resistance in the ignition 1 voltage feed circuit to the SDM
10. Tests for an open or high resistance in the ignition 1 voltage feed circuit to the AIR BAG Fuse
11. Tests for an open or high resistance in the SDM ground circuit
