Firebird V8-5.7L VIN G (2001)
Fuel Tank Pressure Sensor: Service and Repair
FUEL TANK PRESSURE SENSOR REPLACEMENT
REMOVAL PROCEDURE
CAUTION: Refer to the Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
2. Relieve the fuel system pressure. Refer to the Fuel Pressure Relief Procedure.
3. Drain the fuel tank. Refer to Fuel Tank Draining Procedure.
4. Remove the fuel tank.
5. Disconnect the fuel pressure sensor electrical connector.
6. Remove the fuel pressure sensor (1).
INSTALLATION PROCEDURE
1. Install the fuel pressure sensor (1).
2. Connect the fuel pressure sensor electrical connector.
3. Install the fuel tank.
4. Refill the fuel tank.
5. Install the fuel filler cap.
6. Connect the negative battery cable.
7. Inspect for leaks.
7.1.
Turn ON the ignition for 2 seconds.
7.2.
Turn OFF the ignition for 10 seconds.
7.3.
Turn ON the ignition.
7.4.
Check for fuel leaks.
8. Perform the idle learn procedure. Refer to Idle Learn Procedure.
