pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

ABOUT US
Manifold Absolute Pressure (MAP) Sensor <--> [Manifold Pressure/Vacuum Sensor]|Locations|Page 998 > < Manifold Absolute Pressure (MAP) Sensor <--> [Manifold Pressure/Vacuum Sensor]|Locations|Page 996

Firebird V8-5.7L VIN G (2001)

Page 3
background image

2. Connect the MAP sensor electrical connector.

PCV System

3. Position the PCV hose assembly (1) for reassembly.
4. Insert the PCV hose assembly to the mounting brackets (4).
5. Install the PCV valve pipe in the left rocker arm cover.
6. Install the PCV hose (5) to the right bank port.
7. Install the PCV hose (2) to the throttle body.

NOTE:  Refer to Fastener Notice in Service Precautions.

8. Install the PCV heat exchange cable fastener (3).

Tighten
Tighten the PCV heat exchange cable fastener to 12 N.m (106 lb in).

9. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.

10. Position the transmission fluid level indicator tube, and install the tube bolt.

Tighten
Tighten the tube bolt to 50 N.m (37 lb ft).

11. Lower the vehicle.

Manifold Absolute Pressure (MAP) Sensor <--> [Manifold Pressure/Vacuum Sensor]|Locations|Page 998 > < Manifold Absolute Pressure (MAP) Sensor <--> [Manifold Pressure/Vacuum Sensor]|Locations|Page 996