Firebird V8-5.7L VIN G (2001)
1. Install the power steering pressure hose (6) to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the power steering pressure hose (6) to the power steering pump (9).
-
Tighten the fitting to 27 Nm (20 ft. lbs.).
3. Install the power steering pulley. Refer to Power Steering Pulley Replacement.
4. Raise the vehicle on a hoist. Refer to Vehicle Lifting.
5. Install the power steering pressure hose (6) to the power steering gear (3).
-
Tighten the fitting to 27 Nm (20 ft. lbs.).
6. Lower the vehicle.
7. Bleed the power steering system. Refer to Bleeding the Power Steering System.
