Firebird V8-5.7L VIN G (2001)
4. Remove the O-ring seals (1) from the valve end of line.
5. Discard the O-ring seals (1).
Assembly Procedure
1. Inspect the cylinder lines (1) for the following items:
-
Cracks
-
Dents
-
Damage to the threads
2. Replace the parts as needed.
3. Install the new O-ring seals (1) to the valve end of the cylinder lines.
Important: Carefully align the threads on all of the fittings.
4. Finger tighten the fittings in order to avoid stripping and cross-threading the fittings.
Notice: Refer to Fastener Notice in Service Precautions.