Firebird V8-5.7L VIN G (2001)
15. Remove the clutch master cylinder (and reservoir) from the vehicle.
Installation Procedure
1. Install the clutch master cylinder into the opening in the front of dash.
2. Slide the clutch master cylinder reservoir into the opening on the hood strut bracket.
3. Install the clutch master cylinder reservoir push-in retainer.
4. Raise the vehicle.
Important: DO NOT rely on an audible click or a visual verification of the clutch hydraulic hose quick connect fitting connection.
5. Connect the clutch master cylinder hose to the clutch actuator. Push together the clutch hydraulic quick connect fittings, then pull back on the
fittings to verify engagement.
6. Check the clutch hydraulic hoses for twists or kinks.
7. Lower the vehicle.
