G5 L4-2.2L (2007)
Parking Brake Cable: Service and Repair
Park Brake Cable Replacement - Rear (Disc)
Park Brake Cable Replacement - Rear (Disc)
Removal Procedure
1. Remove the front floor console.
2. Ensure that the park brake lever is in the fully released position.
3. Release the tension from the park brake cables.
Using ONLY HAND TOOLS, loosen the adjusting nut (1) completely to the end of the front cable threaded rod.
4. Remove the rear seat lower cushion.
5. Remove the rear carpet retainers.
6. Position the carpet forward in order to access the rear park brake cables and body pass-thru grommets.
7. With the park brake lever in the released position, release the appropriate rear park brake cable end (3) from the cable equalizer.
8. Release the rear cable fitting (2) from the park brake lever bracket (1) and remove the cable from the lever assembly.
9. Release the rear park brake cable body pass-thru grommet.
