G5 L4-2.2L (2007)
Intake Manifold: Service and Repair
Intake Manifold Replacement
Intake Manifold Replacement
Removal Procedure
1. Remove the air cleaner outlet resonator.
2. Remove the throttle body.
3. Disconnect the positive crankcase ventilation (PCV) hose.
4. Disconnect the purge solenoid tube.
5. Disconnect the brake booster hose.
6. Remove the oil level indicator tube bolt.
7. Remove the fuel rail.
8. Disconnect the knock sensor electrical connector.
9. Remove the knock sensor harness connector from the intake manifold.
10. Remove the intake manifold nuts and bolts.
11. Remove the intake manifold.
Important: The intake manifold gasket is reusable, only replace the gasket if damage has occurred.
12. If applicable, remove the intake manifold gasket.
Installation Procedure
1. If applicable, install the intake manifold gasket.
2. Install the intake manifold.